How to setup IPTV on KODI?

An overview of Kodi

Kodi is an open-source media player which is a free application that functions as a digital media center. This application enables you to play your media, cast it between various devices, from a primary location to other devices. There are tons of diverse open-source media players available on the internet from streaming IPTVchannels, but Kodi manages to be the best one in a vast selection. It enables users to stream videos, songs and different digital media contents from a local storage or using an internet connection for streaming online.

Previously known as XBMC (Xbox Media Center), Kodi was formerly intended to serve as a media player for the original Xbox. Nonetheless, as time has passed, XBMC enhanced a continuing open-source project and has strongly built its fame as the elder of media players. By using Kodi, you are will never be limited to one device. Kodi provides you with the capability to stream almost any content from any location. For example, if you have a video on your Smartphone but you want to play it on your gaming console, Kodi will be there for you. Or if you want to see the season six of Game of Thrones throughout a lengthy trip? Kodi got you covered. Basically, all you need to do is to sync it with the device that you want to watch.

How to bring IPTV channels to Kodi

Installing Kodi is astonishingly simple. All you need to do is to download Kodi, double-click on the Kodiimage and then perform the setup wizard. It’s that simple! After Kodi installed, you can download a vast variety of add-ons to improve the experience. Here we will show you how to install it.

Step 1: First start by enabling the “Live TV” feature by selecting “System” and then “Settings“.

Step 2: Select “Live TV” from the menu.

Step 3: Select “Enable” at the top.

Step 4: A message will be shown asking to enable a PVR addon. Click OK.

Step 5: This will take you to the add-on screen for all the PVR clients. Select the “PVR IPTV Simple Client“.

*This add-on is one of the best extension for streaming IPTV channels.

Step 6: After selecting “Enable” click on the “Configure“.

Step 7: Change general location to the “Remote path” (Internet Address) and paste the “M3U URL” provided by your IPTV distributor.

Step 8: After uploading the M3U playlist, Press OK, exit and restart KODI.

After restarting Kodi, A Live TV section will appear in the main menu. Click on it and from here you can stream IPTV channels on your device.

Verdict

Kodi is able to play virtually every media content that you can imagine and is very customizable. Kodi allows you to change the color, skin of the user interface based on your tasteful preferences. You can also download tons of various add-ons to make your entertainment world even more remarkable.

Read more...

How to setup IPTV on a Smart TV?

An overview of SIPTV

With the help of this application, you can play your OTT and IPTV streams on your Smart TV. Currently, SIPTV is the most used application for streaming IPTV channels on Smart TV with frequent updates and a user-friendly interface. This application also supports EPG as well as Picons and grouping. In order to have EPG, Picons and channel groups, the m3u file or URL that you are uploading to this application, must be m3u with options.

Please note, the application does not include any channels, you have to add your own m3u playlists.

How to add IPTV channels to SIPTV

Step 1: Start by downloading the Smart IPTV App from the store.
Please note: For the beginning, the App offers you a 7-day free trial. After the App expires, you can obtain it again via in-App microtransaction by donating a 5.49€  fee.

Step 2: After opening the application and you will see your TV Mac address.
Write it down to prepare for the next step.

* Please note in the above image, the MAC address has been hidden.

Step 3: Open the Playlist Uploader web page.
Place your TV Mac address and the M3U URL you received from your IPTV provider, mark “Keep Online” and press “Add Link“.

Step 4: After uploading your playlist successfully, restart the Smart IPTV application and the channels will be displayed.

Read more...

How to setup IPTV on Android devices using STB Emulator?

This App is intended to be used by expert users. To operate accurately it needs to be configured first and if you’ve never configured IPTV boxes it may be confusing for you to configure it. Please note, by making a simple mistake during your configuration, the App will become unusable. In this tutorial, we are going to show you how to use STB emulator on your device in order to watch IPTV.

Set-top boxes are an excellent way to enjoy your IPTV services. If you don’t want to purchase a Mag Set-top box like the model 254 then you can use an Android machine to imitate the hardware and interface of a Mag box. Joined by an STB Remote App for your Android smartphone, you can have the equal modernized set-top box IPTV experience. Please note, you will need a powerful device to use this emulator.

The Android STB Emulator can imitate the following IPTV set-top boxes.

MAG 200
Check!
MAG 245
Check!
MAG 250
Check!
MAG 260
Check!
MAG 270
Check!
MAG 275
Check!

 

Step 1: You need to download STB emulator App from the Play Store.

Step 2: On the top right corner select “Settings

dav

Step 3: Select “Profile“.

Step 4: Select “New profile“.

Step 5: Select “STB Configuration“.
STB emulator STB configuration

Step 6: Enter your Mac address.

Find your Mac address, this is a number of sorts that you are going to need to tie your device to your subscription.

  • Turn on your device and open the Application.
  • In the main menu select System and then system info.
  • Select the network tab.
  • Write down the last 6 characters of your Mac address (For example: If your Mac address is”2A:B3:35:03:E7:36″ then you should write down 03:E7:36)
  • How to link your Mac address to your Subscription.
    1. Login to your panel.
    2. Click on the change IPTV Mac address button.
    3. In the text field enter 00:1A:79: followed by the last six characters of your Mac address (For example 00:1A:79:03:E7:36)

Step 7Head back and select “Portal settings” and click on “Portal URL” and enter the Portal address provided by your IPTV distributor.

Step 8: Head back and select “Save and restore settings“.

Step 9: Select “SAVE SETTINGS AND PROFILES“.

In the end, restart your device and the portal will start to load.

You have finished setting up an Android device to imitate an IPTV set-top box. Now you have a set-top box experience without purchasing a Mag box. The STB emulator can be a bit challenging to use so if you notice any errors try exiting and restarting the App, or removing the App and installing it again.

Read more...

How to setup Smart IPTV app on a Smart TV – alternative guide?

Important Notice: This application is not a free to use product and it must be activated for a small fee for 5,50€.

Step 1: Start by downloading the smart IPTV app (SIPTV) for your smart TV.
Write down the Mac address of the device as shown on the screen when the app starts.

Go to www.siptv.eu and click activation.

And Activate your device:

Step 2: Now you need to upload the playlist. Click on, My List

Here you must place your TV mac address and the m3u URL and click on Add link.

Reset playlist: In case of having issues or receiving playlist error or URL error, you can try to rest the playlist, just fill in the Mac address and press reset.

After uploading the playlist, restart the application and enjoy watching live TV…

Read more...

How to setup IPTV on iOS using GSE IPTV App?

In this tutorial, we are going to show you how to bring IPTV channels to your GSE IPTV App.

 

Step 1: Start by downloading the GSE IPTV App from App Store and on the top left corner click on the 3 lines to open the main menu.

 

Step 2: Go to the “Xtream Codes API”.

Step 3: Click the “+” at the top right corner of your screen.

Step 4: Now you need to fill in the entries as instructed below:

Playlist name: You can place any name.
Server name: Here you must apply the server name provided by your IPTV distributor.
Username: Enter the username provided by your IPTV distributor.
Password: Enter the password provided by your IPTV distributor.

Step 5: Select “Force update EPG“.

Now Everything is ready and you can start watching Live TV…

Read more...

How to setup IPTV on iOS using IP Television App?

In this tutorial, we are going to show you how to install IPTV on iOS using IP Television App

An overview of IP Television App

IP Television enables you to stream universal channels, worldwide broadcasters and VOD on your iPhoneand iPad (and on your Apple TV).
Wherever you are! You just require an internet connection!

Comfortable and Handy
IP Television is very straightforward to utilize and gives several features.
– Inject numerous playlists and control them efficiently.
– Add channels in 4 separate forms.
– Apply the Electronic Program Guide or EPG.
– And many more…

You can build or upload all the channels and playlists with IP Television.
IP Television has an intuitive interface and enables you to simply control and refresh your playlists.

IP TELEVISION FEATURES:
– Start and control your channel playlists.
– Utilize the menu bar to watch Video on Demand.
– Watch your desired channels.
– Arrange a channel list into sections.

 

How to bring IPTV channels to IP Television App

Step 1: Download IP Television App from the App Store.
Click the “+” icon at the top right corner to upload your playlist.

 

Step 2: Select “Manual Load Channels“.

 

Step 3: Select “Insert the name of your playlist” and enter a name of your choice and then “Insert URL” and enter the complete address of your M3U playlist provided by your IPTV distributor and click on “Save“.

Now restart the Application and start watching Live TV…

Read more...

How to setup IPTV on a MAG device?

In this tutorial, we are going to show you how to bring IPTV channels to your MAG device.

An overview of MAG

MAG boxes are some of the most robust streaming media players. IPTV users choose them for their speed, Simplicity, and excellent streaming performance. The user interface is simple and responsive, channel switching is quick and you receive all the features required to get the most out of your IPTV service.

 

How to setup IPTV on a MAG device

Step 1: When the box is being loaded the main portal screen appears. After that click on “settings”, press remote button “SETUP/SET”.

 

Step 2: Then press on “System settings” and click on “Servers”.

 

Step 3: Select “Portals”.

 

Step 4: In the “Portal 1 name” line enter the following ” IPTV “.
In the “Portal 1 URL” enter the portal address provided by your IPTV distributor.

 

Step 5: When all the operations listed above is done, then press “OK”.
When the settings are being saved click “EXIT” on the remote control and press option “General”.
In the “NTP server,” line enter the following address “pool.ntp.org or us.pool.ntp.org“ for North America.

 

Press “OK” to save the changes you made.

When all the steps listed above are done press”EXIT” 2 times on the remote control and restart the portal.

Now everything is ready to start watching Live TV…

Read more...

How to setup IPTV Stalker on KODI?

Step 1: Go to settings and then select Add-ons.

Step 2: Now select My Add-ons.

Step 3: From here select PVR clients.

Step 4: And then select Stalker client.

Step 5: Select Configure.

Step 6: Select Portal 1, And Here enter the Mac address and Server address provided by your IPTV distributor. After entering the info accurately, Select “OK”

How to find the Mac address and link it to your account:

Part 1: Find your Mac address, This is a number of sorts that you are going to need to tie your device to your subscription.

  1. Turn on your device and open KODI.
  2. In the main menu select System and then system info.
  3. Select the network tab.
  4. Write down the last 6 characters of your Mac address (For example: If yourMac address is”2A:B3:35:03:E7:36″ then you should write down 03:E7:36)

Part 2: How to link your Mac address to your Subscription:

  1. Login to your panel
  2. Click on the change IPTV Mac address button.
  3. In the text field provided enter 00:1A:79: followed by the last six characters of your Mac address (For example:00:1A:79:03:E7:36)

Step 7: Select “Enable”.

Step 8: Head back to main settings and then click on TV.

Step 9: In the TV settings Select “Enabled”.

Step 10: In this phase, it’s important that you restart your device to avoid errors. After restart TV section will appear, click on TV and enjoy …

Read more...

How to setup IPTV using Wiseplay?

In this tutorial we will show you how to add an M3U URL to Wiseplay.

 

How to add a list from a URL

Step 1: To add a playlist using an M3U URL, select the pink circle at the bottom right corner of your screen and select “Add List from URL” and paste your M3U URL.

 

Step 2: After importing your M3U URL,  select your added playlist.

 

Step 3: Here you will be able to select the channels based on each group.

 

Read more...

How to setup IPTV on Roku using M3U playlist player?

In this tutorial we will show you how to use an M3U URL on Roku.

 

How to add a list from a URL

Step 1: Start by downloading the M3U playlist player from the Roku online store.

 

Step 2: Now click on “Add New or Updated Playlist”.

 

Step 3: Enter your M3U URL and click on “Save Your Playlist”.

 

Step 4: Depend on your M3U playlist, it might take a couple of minutes before your playlist gets fully loaded.

 

Now your M3U playlist is fully loaded and you can start watching TV by selecting any channel.

Read more...